How do I mount the Lomo LC-A+ Splitzer onto my Lomo LC-A+ camera?

Note that your Lomo LC-A+ Splitzer will only work with the Lomo LC-A+. It will not be compatible with the older LC-As because the older LC-As do not have the grooves on both sides of the faceplate where the Lomo LC-A+ Splitzer will be attached.

Here are steps on how to use your Lomo LC-A+ Splitzer:

You will need:
Lomo LC-A+
Lomo LC-A+ Splitzer

To mount the Splitzer, merely slide it onto the faceplate of your Lomo LC-A+.

Your splitzing is done via two rotating blinds – thereby dividing up the image frame in a countless variety of ways. Each of the blinds has a small plastic nub that you can turn with a fingernail. Use your finger to turn the Lomo LC-A+ Splitzer around before you click on the shutter. Afterwards, turn the Lomo LC-A+ Splitzer again and click on the shutter for multiple exposures.

Be sure to keep track of which parts of your image have been exposed. Or don’t – and allow the surprises to come and slap you silly. Either way, the only word of Lomo LC-A+ Splitzer caution is this: when you’re finished, remove it from your lens slowly and carefully.

Find out all our tips, tricks and advice on the LC-A.

written on 2010-03-30 in #camera #lomo-lc-a